Description
Pixl 8000 Vape Kit
The Pixl 8000 is a rechargeable prefilled pod kit that delivers up to 8,000 puffs per refill pack. It runs on a built-in 850mAh battery, charges via USB-C and carries a clear LED screen that shows your battery percentage and current mode at a glance. Each kit comes with a 2ml prefilled mesh coil pod and a 10ml refill container, both filled with 20mg nic salt e-liquid, for a smooth MTL draw that sits close to the feel of a cigarette.
The standout feature is the boost mode button on the side, which doubles up vapour output and flavour intensity on demand with a double-click – something most prefilled pod kits at this price point do not offer. Available as the Pixl 8000, Pixl 8000 vape kit, and Pixl 8000 pre-filled pod vape kit, all of which refer to this same device; replacement refill packs are sold separately at Vapeology.
Pixl 8000 Key Features
Up to 8,000 puffs per refill pack (2ml pod plus 10ml refill container)
850mAh built-in battery – USB-C charging, cable not included
Boost mode – double-click the side button for more vapour and stronger flavour
LED screen showing battery percentage, current mode and lock status
Draw-activated – no buttons to press to vape, inhale to fire
5-click safety lock via the side button
Mesh coil built into the prefilled pod
20mg nic salt e-liquid, MTL draw style
Magnetic pod fitting – click in and go
12ml total e-liquid capacity per refill pack
99 × 44 × 23mm, 74g
39 flavours available
Battery and Charging
The 850mAh battery is built in and not user-replaceable. On standard draw-activated mode it will last most MTL vapers a full day of use on a single charge. Running boost mode throughout will shorten that, but USB-C charging is quick – a short top-up while you eat or sit at a desk keeps you going. The battery percentage displays on the screen rather than a colour-coded LED system, so you get a precise reading rather than a rough estimate. One thing to note: a USB-C cable is not included in the box, so you will need to supply your own.
Boost Mode
Boost mode is the main thing that sets the Pixl 8000 apart from comparable kits. In standard mode you get a smooth, controlled MTL draw that is consistent and undemanding. Double-click the side button and the device steps up its output – vapour production increases, flavour comes through more strongly, and the draw feels warmer and denser. A small fire icon appears on the screen to confirm boost is active. Double-click again to go back to standard. It is useful if a particular flavour is a bit flat at standard output, or when you want more from an evening vape without swapping devices.
Screen and Lock
The LED screen is on the front of the device and updates with every draw. It shows your battery level as a percentage, a fire icon when boost mode is running, and a lock icon when the device is locked. The lock is activated by pressing the side button five times quickly – the same five-click method used on most pod kits and vape mods. When locked, the device does not fire on an accidental draw. If the screen shows E2, the pod is not seated correctly – pull it out, check the gold contacts on the base, and push it back in firmly until it clicks.
Pod and Refill System
The kit ships with a prefilled 2ml pod and a 10ml refill container, both filled with the same flavour at 20mg nic salt. The pod contains the mesh coil and fits magnetically into the top of the device. You vape through the 2ml pod first; when it empties, the kit pulls from the 10ml container below to keep the pod topped up – there is no manual refilling involved. When the 10ml container runs out, the whole refill pack is replaced. Replacement Pixl 8000 Refill Packs are available separately at Vapeology across all 39 flavours in the range.
Who It Suits
The Pixl 8000 is a good fit for anyone switching from cigarettes or disposable vapes who wants a longer-lasting device without adding complexity. The draw-activated firing means there are no settings to adjust before you can vape – take it out of the box, plug in the pod, and inhale. The 20mg nic salt e-liquid and MTL draw deliver the throat hit and craving relief that maps most closely to smoking. The reusable battery and replaceable refill packs make it more cost-effective than cycling through standard 600-puff disposables, and the boost button gives you a bit of room to personalise your vape without buying a different device.
How to Unlock the Pixl 8000
Press the side button five times quickly to lock or unlock the device. A lock icon appears on the screen when it is locked. The same five-click sequence unlocks it again. If your device is not firing and the screen is showing a lock icon, this is the fix. If the screen shows E2 rather than a lock icon, the issue is the pod – remove it and reseat it as above.
Pixl 8000 Flavours
Black Cherry
Blue Cherry Cranberry
Blue Magic
Blue Razz Cherry
Blue Razz Chew
Blue Razz Cotton
Blue Razz Lemonade
Blueberry Raspberry
Blueberry Sour Razz
Cherry Ice
Cherry Lemonade
Cherry Pop
Cherry Sour Raspberry
Cola Lime
Double Apple
Fresh Mint
Hawaiian Oasis
Juicy Peach
Lemon & Lime
Mango Ice
Paradise Punch
Pineapple Ice
Pink Lemonade
Pink Razz
Pixl Dust
Purple Dream
Rainbow Rush
Raspberry Watermelon
Sakura Raspberry
Sour Cherry Apple
Sour Pineapple Mango
Spearmint
Starmix
Strawberry Burst
Strawberry Kiwi Bubba
Strawberry Kiwi Razz
Strawberry Watermelon
Tropical Wave
Watermelon Ice
What’s in the Box
1 x Pixl 8000 device (850mAh)
1 x 2ml prefilled mesh coil pod
1 x 10ml e-liquid refill container
User manual
USB-C charging cable is not included. Pixl 8000 Refill Packs are available separately at Vapeology.
