Description
Vaporesso Luxe XR Pods
Vaporesso Luxe XR replacement pods are empty refillable pods that accept replaceable GTX coils, sold in packs of two with no coil included. They come in two types: an MTL pod for tighter draws and a DTL pod for looser, cloudier vaping. Each pod holds 2ml under UK TPD regulations and fills from the bottom through a silicone stopper.
GTX coils press-fit into the pod in seconds, so you only replace the coil when it wears out rather than the entire pod. The Luxe XR pods fit every device in the Luxe X family, including the Luxe X, X2, X3, X Pro, XR, XR Max, and XR Max 2.
Luxe XR Pod Key Features
MTL pod for 0.8 and 1.2 ohm GTX coils
DTL pod for 0.2 to 0.6 ohm GTX coils
Replaceable GTX coils with press-fit installation
2ml capacity with bottom-fill silicone stopper
SSS leak-resistant technology
Transparent PCTG construction with magnetic connection
Compatible with all seven Luxe X family devices
How to install coils and fill XR pods
E-liquid recommendations by coil resistance
MTL Pod for 0.8 and 1.2 Ohm GTX Coils
The Luxe XR MTL pod has a narrow airway for a tight draw similar to a cigarette. It accepts the 0.8 ohm GTX Mesh coil (12-20W) and the 1.2 ohm GTX Mesh coil (7-11W). Both produce modest vapour with strong throat hit and concentrated flavour. Best suited to 50/50 VG/PG nicotine salt e-liquids at 10mg or 20mg.
DTL Pod for 0.2 to 0.6 Ohm GTX Coils
The Luxe XR DTL pod has a wider airway for a looser draw with more vapour. It accepts the 0.2 ohm GTX Dual Mesh (45-60W), 0.3 ohm (32-45W), 0.4 ohm (26-32W), and 0.6 ohm (20-30W) GTX coils. The 0.6 ohm coil also works well for restricted DTL (RDL) vaping. The 0.2 ohm coil needs 45W or more, so it only runs properly on the XR Max and XR Max 2.
Replaceable GTX Coils with Press-Fit Installation
GTX coils push into the base of the pod without threading or twisting. Pull the old coil out, drop the new one in, and press firmly until it clicks. Because you replace only the coil and not the pod, the XR system costs less to run over time than built-in coil pods. GTX coils are sold separately in packs of five.
2ml Capacity with Bottom-Fill Silicone Stopper
Each pod holds 2ml of e-liquid under UK TPD regulations. The fill port is on the bottom, sealed with a silicone stopper that pulls out for refilling. The transparent PCTG body lets you check the e-liquid level without removing the pod from the device.
SSS Leak-Resistant Technology
Vaporesso’s SSS design uses three sealing points at the coil seat, fill stopper, and pod-to-device connection to keep e-liquid contained. This is particularly useful on replaceable coil pods, where the coil junction can be a weak point for leaks on other brands. Always check the coil is fully seated and the fill stopper is firmly closed after refilling.
Transparent PCTG Construction with Magnetic Connection
The pod is made from food-grade PCTG plastic that is durable and does not affect e-liquid flavour. It connects magnetically to the device for a secure fit and easy removal. The pod sits flush with the top of the device for a clean look.
Compatible with All Seven Luxe X Family Devices
Luxe XR pods fit the following devices using the same magnetic connection:
Vaporesso Luxe X
Vaporesso Luxe X2
Vaporesso Luxe X3
Vaporesso Luxe X Pro
Vaporesso Luxe XR
Vaporesso Luxe XR Max
Vaporesso Luxe XR Max 2
The 0.4 ohm coil and above work on every device in the range. The 0.2 ohm coil needs 45W or more, so it suits only the XR Max and XR Max 2. Luxe XR pods are not compatible with XROS or Luxe Q devices.
How to Install Coils and Fill XR Pods
Press a new GTX coil into the base of the pod until it clicks
Turn the pod upside down and pull the silicone fill stopper out
Fill to just below the top of the port
Press the stopper firmly back in
Leave for five minutes before your first vape so the cotton saturates
E-Liquid Recommendations by Coil Resistance
0.2 to 0.4 ohm DTL coils: 70% VG or higher freebase e-liquid at 3mg or 6mg
0.6 ohm RDL coil: 50/50 or 60/40 VG/PG with freebase at 6mg or nic salts at 10mg
0.8 and 1.2 ohm MTL coils: 50/50 VG/PG with nicotine salts at 10mg or 20mg
Luxe XR Pod Variants
Luxe XR Empty Pod – MTL (fits 0.8 and 1.2 ohm GTX coils) – 2 pack
Luxe XR Empty Pod – DTL (fits 0.2, 0.3, 0.4, and 0.6 ohm GTX coils) – 2 pack
What’s in the Box
2 x Vaporesso Luxe XR empty replacement pods (selected variant, no coil included)
GTX coils are sold separately and must be installed before use.
