Description
The Geekvape J Replacement Pod is the 5mL built-in-coil cartridge for the Geekvape Digi series pod mods, including the Digi Pro, Digi Pro R, Digi Max and Digi Max R. Each pod carries a built-in coil (single coil except the dual-coil 0.3Ω), so there is nothing to swap or seat: fill, click it onto the device and vape until the coil is spent, then replace the whole pod. The J family spans six resistances from 0.2Ω to 1.2Ω, covering everything from tight mouth-to-lung draws on nicotine salts to open direct-lung hits on high-VG freebase, all from the same device.
Power is matched to the coil: the 1.2Ω runs 8-12W for MTL, the 0.8Ω sits at 12-17W (12-18W on Geekvape’s store) for MTL or a restricted draw, the 0.6Ω at 16-21W and the 0.4Ω at 23-28W deliver restricted direct-lung, and the 0.3Ω dual-mesh coil pushes 30-40W for a warmer, denser RDL vape. The 0.2Ω option is the lowest-resistance, full DTL pod, rated 50-60W, and Geekvape marks it for the Digi Max only. A top airflow control slider lets users fine-tune the draw on any pod, and Geekvape’s airflow structure splits incoming air into four streams around the coil while routing condensation back into the pod to keep the device clean.
Retailers describe the pod body as clear PCTG with a magnetic base; it keeps the e-liquid level visible, fills through a side fill port under a silicone plug and snaps onto the Digi devices. Pods are sold in packs of two. Because the Digi Pro and Digi Max ship with only 0.4Ω and 0.6Ω cartridges, stocking the full resistance spread gives Digi owners a reason to return for their preferred draw, and the shared J platform across all four Digi devices keeps inventory simple: one pod range serves every kit in the line.
Geekvape J Replacement Pods 5mL Resistance Guide:
0.2Ω: Geekvape rates it 50-60W. Direct-to-lung draw. Single coil, the lowest resistance of the six, and Geekvape marks it for the Digi Max only.
0.3Ω: Geekvape rates it 30-40W. Restricted direct-lung draw. Dual coil, the only one of the six, and the lowest resistance the Digi Pro takes.
0.4Ω: Geekvape rates it 23-28W. Restricted direct-lung draw. Single coil, and the pod Geekvape pre-installs in the Digi Max and Digi Pro kits.
0.6Ω: Geekvape rates it 16-21W. Restricted direct-lung draw. Single coil, and the spare pod Geekvape packs in the Digi Max and Digi Pro kits.
0.8Ω: Geekvape rates it 12-17W on its chart, 12-18W on its store. Mouth-to-lung and restricted draw. Single coil, the only pod here marked for both draws.
1.2Ω: Geekvape rates it 8-12W. Mouth-to-lung draw. Single coil, the highest resistance and lowest power of the six.
Geekvape J Replacement Pods 5mL Compatible With:
Geekvape Digi Pro Pod Mod Kit (2000mAh, 40W) (not the 0.2Ω pod)
Geekvape Digi Pro R Pod Mod Kit (2000mAh) (not the 0.2Ω pod)
Geekvape Digi Max Pod Mod Kit (3000mAh, 80W)
Geekvape Digi Max R Pod Mod Kit (3000mAh)
Geekvape J Replacement Pods 5mL Key Features:
Pod Capacity: 5mL (2mL TPD version also produced)
Resistance Options: 0.2Ω (DTL, 50-60W, Digi Max and Digi Max R only) · 0.3Ω dual mesh (RDL, 30-40W) · 0.4Ω (RDL, 23-28W) · 0.6Ω (RDL, 16-21W) · 0.8Ω (MTL and restricted, 12-17W on Geekvape’s chart, 12-18W on its store) · 1.2Ω (MTL, 8-12W)
Coil Type: Built-in (non-replaceable) coil; single coil except the 0.3Ω, which Geekvape calls dual mesh
Fill System: Side fill port under a silicone plug
Connection: Magnetic (retailer-sourced)
Airflow: Adjustable top airflow control; four-stream airflow around the coil with condensation routed back into the pod
Material: PCTG (retailer-sourced)
Pack Quantity: 2 pods per pack
Compatibility: Geekvape Digi Pro and Digi Pro R (not the 0.2Ω pod), Digi Max, Digi Max R (J Cartridge platform; JR Cartridge is the external-coil sibling)
Click Here to Shop All the Geekvape Products
Geekvape J Replacement Pods 5mL Purchase Includes:
2 x Geekvape J Replacement Pod 5mL
