Description
The Geekvape N Series Replacement Pod is the refillable 2mL cartridge built for the Aegis Nano family, covering the Aegis Nano 2 and the Aegis Nano 3, and per Geekvape’s store the original Aegis Nano 30W. Each pod carries an integrated coil in one of two resistances: a 0.6Ω head rated for 20 to 25W that delivers a restricted direct-lung draw with fuller vapor, or a 1.2Ω head rated for 9 to 14W on the box (Geekvape’s site also quotes 11-14W) with a tighter draw (retailers describe it as MTL) that suits higher-strength nicotine salts. Both fall comfortably inside the 30W ceiling shared across the Nano line; check the wattage after swapping pods, 20-25W for the 0.6Ω and 9-14W for the 1.2Ω.
The pod locks onto the device with a magnetic click connection and refills through a top-fill port, so there is no need to remove the cartridge from the mod to top it up. Airflow is set on the device rather than the pod, letting the same cartridge run either RDL or MTL depending on where the device’s airflow control is set. Geekvape’s current N Series pod is the upgraded revision with a reworked internal structure that reduces leakage compared to the first-generation cartridge, and the coil is non-replaceable, so the whole pod is swapped once the cotton is spent.
Every pack contains two pods of a single resistance, making it easy to stock the two options side by side for customers who run different coil heads on the same kit. Because the N Series cartridge is shared across three generations of Aegis Nano hardware, one SKU covers replacement demand for the entire range, from early 30W kits still in circulation to the latest 1600mAh Nano 3. It is a fast-turning consumable for any shop that sells the Aegis Nano line.
Geekvape N Series Replacement Pods Resistance Guide:
0.6Ω: Geekvape rates it 20-25W. Restricted direct-lung draw. Higher-power pod, pre-installed in the Aegis Nano 2 and 3 kits.
1.2Ω: Geekvape prints 9-14W on the box, 11-14W on its website. Restricted direct-lung draw. Lower-power pod, the spare in the Aegis Nano 2 and 3 kits.
Geekvape N Series Replacement Pods Compatible With:
Geekvape Aegis Nano Kit (30W) (per Geekvape’s store)
Geekvape Aegis Nano 2 Kit (1100mAh)
Geekvape Aegis Nano 3 Kit (1600mAh)
Geekvape N Series Replacement Pods Key Features:
Pod Capacity: 2mL refillable
Resistance Options: 0.6Ω (20–25W, RDL) or 1.2Ω (9–14W on the box; Geekvape’s site also quotes 11–14W)
Coil Type: Integrated, non-replaceable coil (pod and coil replaced as one unit)
Fill System: Top fill
Connection: Magnetic click-in
Airflow: Adjusted on the device; supports RDL and MTL
Pack Quantity: 2 pods per pack (single resistance per pack)
Compatibility: Geekvape Aegis Nano (30W, per Geekvape’s store), Aegis Nano 2, Aegis Nano 3
Click Here to Shop All the Geekvape Products
Geekvape N Series Replacement Pods Purchase Includes:
2 x Geekvape N Series Replacement Pod
